Airbag360 emulators are equipped with original manufacturer connector .
Installation can be completed in 3 simple steps .
1. With ingnition turned OFF ( dont need to disconnect battery ) look under the passenger seat and disconnect original occupancy sensor connector
2. In place of the sensor plug in Airbag360 emulator
3. Turn On ingnition
In most cases after installation of our emulator the SRS warning light goes OFF without erasing fault codes .
It depends for how long the malfunction fault code was stored and in which memory was saved .
All orders placed with Airbag360 online shop are processed and posted on same or next working day .
Estimated delivery time to U.S ? Between 5 and 7 working days.
Delivery is made by USPS registered, trackable signed for service .
How Airbag360 Device works ?
For Safety reasons our Emulator generated and send the same signal to airbagmodule as occupied seat
- In case of accident the airbag will deploy even without presence of Passenger.
With our emulator installed Passenger Airbag will be Activated at all Time's ! is nothing to worried as many cars dont have occupancy sensors and their airbag's are pernamently activated .
We Advice that rear-facing child seat's not to be transported on front seat in your vehicle when emulator is in use.
The Safest place for child seat in your vehicle is at back seat behind driver.
IF You are not sure about compatiability with your vehicle
please use contact form or send E-mail to email@example.com