Cart: 0 item (s) - $0.00

Infiniti G37 G37X Occupant Classification System OCS Sensor EMULATOR / Bypass

Product Condition: New
Qty From Qty To Unit Price
1 $79.00
2 $69.00
You Will Earn 79 points which is the equivalent of $11.85
Infiniti G37 G37X Passenger Airbag OCS Sensor (Occupant Classification)  b1018  - bypass emulator



Make:     INFINITI
Model: G37 G37X   

Year's :     2008-2013

Additional detail :
3 wire OCS sensor ( brown , red , white )
Connector for the sensor can be hidden at a different location if you are unable to locate the connector send us a message and we will help You to find the connector.
If you are unsure about compatibility with your vehicle, please use the contact form or send an email to

OCS  malfunction codes are b1018 & b1019 
In rare occasion  these codes are accompanied & triggered with b1022- communication fault.


            Product Features:

  • Our modules have been fully tested using the Original Airbag System installation.
  • Airbag360 modules are covered with a lifetime warranty
  • For easy installation Airbag360 emulators are equipped with original manufacturer connectors.
  • There is no risk of making a wrong connection
  • Installation of our modules can be done by anyone without extra cost.
  • Seat Occupied - Airbag Enabled
  • QC passed.
  • Made by a professional company from the highest quality components tested for automotive applications.
  • After sale support
  • 30 days money-back Guarantee

Prior to buying an Airbag360 module, please make sure that your car’s airbag problem has been correctly diagnosed.

If you are unsure about the OBDII diagnostic codes or their description, please contact us and we will check and confirm them for you.

Our Airbag360 emulator will only cure / resolve diagnostic fault codes that indicate a passenger occupancy sensor malfunction.

Any other unrelated codes need to be resolved separately.


Airbag360 emulators are equipped with an original manufacturer connector.

Installation can be completed in 3 simple steps.

1. With the ignition turned OFF (disconnecting the battery is not necessary) look under the passenger seat and disconnect the original occupancy sensor connector. (3-pronged)

2. Replace the original sensor plug with the Airbag360 emulator

3. Turn on the ignition and start the vehicle.

In most cases after the installation of our emulator, the SRS warning light will go OFF without having to erase any fault codes.

In some cases it depends on how long the malfunction fault code has been stored and in which memory it was saved to.


All orders placed with the Airbag360 online shop are processed and posted on the same or next working day.

Estimated delivery time to the U.S is between 7 and 10  working days.

Delivery is made by the USPS by registered mail with tracking number requiring a signature upon receipt.

How does the Airbag360 device work?

For safety reasons our emulator generates and sends the same signal to the airbag monitoring system as would an occupied seat.

In case of an accident, the airbag will deploy even without the presence of a passenger.

With our emulator installed, the Passenger Airbag will be activated at all times! This is nothing to be concerned about as many cars do not have occupancy sensors and their airbags are permanently activated.

We advise you not to transport rear-facing child seats on the front passenger seat of your vehicle when using the emulator. The safest place for a child seat in your vehicle is in the back seat behind the driver.

If you are unsure about compatibility with your vehicle, please use the contact form or send an email to

Your Safety is Our Priority !


Write an online review and share your thoughts with other shoppers!

David E Sweet-Pensacola Fl-5 Stars

Your product is awesome! You saved me nearly $8,000!

The Infinity dealership wanted nearly $8,000 to fix the passenger air bag sensor by replacing the entire front seat, what a terrible way to solve the issue. Your device which was pretty easy to install, saved us a lot of money and made my wife safe at the same time, thanks for building this product!

Mark Nyunya-USA -5 Stars


bought it for my 2014 Infiniti q60. Had it for a week and no issues works fine so far

Derrick G.-Atlanta, GA USA-5 Stars

Refuse to pay 6,000 USD for faulty sensor replacement

I own a 2012 Infiniti G37S roadster, and randomly one morning I start my car, and the SRS light is flashing like a turn signal indicator. So I pulled out my bi-communication diagnostic tool and read the code. Got online and found a plethora of information and also hundreds of thousands of consumers like me, for some reason Nissan did a voluntary recall on certain models, if your car was still within warranty period, Infiniti however just decided us "luxury" owners get to take an upper radiator hose, with no lubricant, and you know where it goes.... Searched and found made the purchase of the NSN-1 emulator. I installed it about twenty minutes ago and finally the annoying flash is gone.

Just to give a heads up for install, remove the plastic finisher panel directly in front of the base of the passenger seat, it'll actually allows you to get a get look at the OEM wire harness you need to unplug to play the emulator in, it's kind of hidden, but look for the yellow harness, it's directly beside it. Also tracing a three wire circuit that has a red and a purple wire will lead you to the correct harness.

Curtis C-Florida, US-5 Stars

2013 Infiniti G37

After a dreaded b1018 code, and Infiniti wanting $$$$ to replace, I opted for this bypass.

The project was smooth once I unbolted the seat to have better access and I was finished in approximately 30 minutes.

Jake D.-Pennsylvania, USA-5 Stars

Worked perfectly on my 09 G37 Coupe S! Fixed my problem 100% recommended!

The dealership was charging me a hair under 6k to replace the seat cushion in order to turn off my seat occupancy light. Took my chance with this one and it worked perfectly. Finally that annoying light is gone! Just saved myself 6k. 100% recommended!