Cadillac STS  PPS  passenger  presence  sensor   emulator

Compatibility:

• Make: Cadillac 
• Model: STS
• Years: 2006-2010 
• Version :  USA   - primarily for U.S and Canadian vehicles. 

Important Before Purchase:

• Ensure your vehicle's airbag issue has been correctly diagnosed.
• Note that B0081-71 (Invalid Serial Data) cannot be properly addressed by  emulator . To diagnose and erase  fault code, the TECH2 OBD reader is highly recommended, 

Contact us if you require assistance with OBDII diagnostic codes

Installation Instructions:

With its original manufacturer connector, the Airbag360 OCS emulator ensures a simple and error-free installation. Crucially, for safety, it simulates a "Seat Occupied" status, thereby enabling the passenger airbag

1. Turn OFF the ignition. Locate and disconnect the original occupancy sensor connector  under the passenger seat.
2. Connect the Airbag360 emulator to the original sensor plug.
3. Turn on the ignition and erase the code using the recommended TECH2 OBD scanner

The emulator simulates an occupied seat Therefore, the airbag will be armed, and the car will prompt you to fasten your seatbelt.